ZHSYMX Fuel Sending Unit and Gauge Kit Boat Fuel Sender Fuel Water Level Sensor 240-33ohms 8" (200mm) Fuel Tank Sender Stainless Steel Gas Sensor for

ZHSYMX Fuel Sending Unit and Gauge Kit Boat Fuel Sender Fuel Water Level Sensor 240-33ohms 8" (200mm) Fuel Tank Sender Stainless Steel Gas Sensor for

【Fuel Sender Material】: Fuel sending unit is made with heavy duty stainless steel. This water level sensor is reed switch, durability and reliability, steady output signal. No adjustment needed for tank. 【Perfect Replacement Fuel Sender 】: Sucicago Reed Switch Diesel Fuel Water Level Sensor is a Better Option Than the Traditional Lever Type Sensors. The Boat Fuel Tank Will not Effected by The Constant Movement Caused by Waves and Boat Rocking. 【High Quality Material】:SAE 5 hole mounting pattern, heavy duty 316 stainless steel and rugged construction.Signal Output: 240-33 ohms.Wide Application: It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto. 【Note】: to allow the sender not hit the bottom of the tank, the length of sender should be 1" less than the depth of the tank if tank is plastic, and 0.5" less than the depth of the tank if tank is metal . Your satisfaction is our great motivation, if you have any questions before purchase or after purchase, please feel free to contact us, we will give you a satisfied solution within 24 hours.

ZHSYMX Reed Switch Fuel Sending Unit and Fuel Gauge Kit is Designed For the One Who Are looking for A Simple Solution To Measure The Amount of Fuel/Gasoline Level In The Tank.

Ordering a Set Having Both Gauge And Sender To Avoid Compatibility Issue.

Liquid Level Sender with Signal output 240-33 ohms.

Precision Range: 10-21mm

Material:Body: SUS 316 Stainless Steel.

Cable: PVC.

Float: NBR.

Mounting Methods: Standard SAE 5 hole pattern.

Protection Rank: IP65.

Output Signal: 240-33ohms

Operational Temperature: -40°F ~ +85°F (-40°C ~ +85°C).

Package Information:

1x ZHSYMX Fuel Sender

1x ZHXYMX Fuel Gauge

1 x Gasket

5 x M5*0.8 Length(16mm) Screws

【Really Important to Know BEFORE You Order】To Allow The Sender not Hit The Bottom of The Tank, The Length of Sender Should be 1" less Than The Depth of The Tank If Tank Is Plastic, And 0.5" Less Than The Depth of The Tank If Tank is Metal . The Diameter of Float is 1.38"(35mm). If You Have to Drill The Hole, Diameter 1.50"(38mm) Hole Would be Perfect.