Blower Fan DC 12V 2W 0.18A,Length 1.97 Inch Height 1.97 Inch Thichness 0.59 Inch Circular Frame DC Brushless Fan,5000 RPM DC Cooling Fan,2.5-2P pin(

Blower Fan DC 12V 2W 0.18A,Length 1.97 Inch Height 1.97 Inch Thichness 0.59 Inch Circular Frame DC Brushless Fan,5000 RPM DC Cooling Fan,2.5-2P pin(

Cooling Exhaust Fan DC blower fan 12V,0.18A 5000RPM Airflow 4.2CFM power consumption only 1.2W to 2.4W DC fan frame size: circular frame,1.97 inches long, 1.97 inches high, 0.59 inches thick, made of fire-proof and environment-friendly PBT material, 2 mounting holes size 0.177 inches, easy installation DC cooling fan has good low-voltage start-up performance, start-up voltage as low as 5V,Operation voltage range is 5V to 13.8V Brushless Motor Cooling Fan uses the high quality bearing, the service life may continuously work 30,000 hours above Cooling Exhaust Fan Axial DC cooling fan power supply line adopts UL AWG26 wire, the wire length is 11.81 inches, the red line positive and black line negative.Circuit is protected when VCC and GND are exchange

This is a low-power DC blower fan, with high air volume, low noise, long service life and other characteristics, widely used in communication electronics, power and other places need heat dissipation. The basic characteristics are:

Modal NO.:PY-5015H12S
Operation Voltage Range:DC 5V-13.8V
Rated Current:0.18A
Power Consumption:1.2W-2.4W
Dimension of Fan:50mm X 50 mm X 15 mm,Circular Frame
Speed：5000±10％R.P.M
Airflow：4.2CFM
Air Pressure：11.85mmH2O
Noise：37dB(A)

Lead Wire：The frame red-black wire is 300±10 mm long, 26AWG, UL certified,the red line positive and black line negative，2.5-2P pin.Circuit is protected when VCC＆GND are exchanged.

Frame & Blade：PBT Black , environmentally friendly, fire-resistant in line with the UL94V0 standard
Rotating Direction：Counterclockwise
Operating temperature/humidity range：-20℃～70℃，35%～85%RH
Insulation grade：UL Class A Expect Life：30,000hrs,40℃
1 Pack: 1 pcs
Please do not use the fan in the environment of corros ive gas or liq.For softy's reason, finger guard will be need on the inlet and outlet sides of fan. Do not try to touch or hold the impeller from.