70W 58.8V 1.2A Charger Replacement for Segway Ninebot S-Plus/S Plus/Mini Plus/Mini-Plus

70W 58.8V 1.2A Charger Replacement for Segway Ninebot S-Plus/S Plus/Mini Plus/Mini-Plus

Output : 58.8V 1.2A (compatible 58.8V 1A and 58.2V 1.2A) ; Input : AC 100-240V 50-60HZ ; Rated Power : 70W; Fitting for: Xiaomi Mini Plus, Ninebot S-Plus, Mini Plus Fast Charging and Providing Overcharge Protection System/Shortcircuit/Overload Protection/Over-Heat Protection Indication Light:green light when power indicate, red light when charging, green light when fully charged Warranty: 12 Months warranty, 30 days money return guarantee,24 x 7 email support. Reminder: The heat generated during charging is due to: part of the electrical energy is converted into heat when the components are working, which is a normal loss. In order to prolong the service life of the charger, please charge in an environment with a temperature of 0°~40°.

Please note that:
Before ordering, please make sure that the connector of the old charger is the same as ours.
1. If you receive a damaged item by the shipping, Please don't use the damaged item to charge.
2. Please use the products within one year.
3. Do not use over 12 hour per charge time.
4. Please charge in a ventilated environment.
5. Please don't cover the charger.
6. Please make sure your hands and the plugs are dry.

There may be the following reasons for the charger not working after connecting to the power supply:
1. The voltage and current of the charger do not match your battery. You have purchased a charger with wrong parameters. Please tell us the brand and model of your electric bike or the parameters and plug of the original charger.
2. Due to the limited life of the lithium battery, the charger will not work if the battery is damaged. Your battery may be damaged if it is not used for more than 12 months or 2-3 months.
3. If the green light comes on when the power is turned on, but the LED light does not turn red after the battery is connected, the connector should be loose and in poor contact, and the plug can be re inserted to maintain good contact
4. If there is a green light when plugged into the power supply, and the light goes out after connecting the electric bicycle, it is because of the internal short circuit of the electric bicycle, which causes the charger to have a self-protection function. You'd better check your e-bike battery and replace it.