FixMaster 1/4 x 1-1/4" Countersunk Phillips Flat Head Blue Concrete Screw Anchors (100 pcs Screw Kit) with one Screwdriver and Drill Bit for Concrete,

FixMaster 1/4 x 1-1/4" Countersunk Phillips Flat Head Blue Concrete Screw Anchors (100 pcs Screw Kit) with one Screwdriver and Drill Bit for Concrete,

[PRODUCT] Includes 100 1/4 inch [8/32"] (#14 screw) x 1-1/4 inch long Screw Anchors, 1 Drill Bit & 1 Screwdriver Bit so you are ready to tackle your Commercial, DIY & Home improvement jobs - Heavy Duty General Purpose Versatile Fixing Screws [APPLICATIONS] Concrete Screws can be used for Applications including Concrete Block, Cinder Block, Mortar, Masonry, Brick, Wood, Drywall & Stucco [HIGH QUALITY] A High and Low Thread Design along with Wide Serrated Threads provides a Faster Drilling Speed allowing the Screw Anchor to Quickly Penetrate any Base Material [SELF-TAPPING TECHNOLOGY] A Diamond Point Designed Screw Tip Threads Directly into Base Materials, Eliminating the need for other Anchors or Screws [CORRSOION RESISTANT] A Blue Epoxy Coating can Withstand Hydrochloric Acid Corrosion for 1000 Hours, Ensuring Long Lasting Durability. Anti-Corrosion Coating is especially useful in Hurricane or Damp Environments [MATERIAL] Manufactured from Heat-Treated 1022A High Strength Carbon Steel for Strength and Durability [SERVICE] 100% Customer Satisfaction and Money Back Guarantee & Responsive Customer Support for Returns The Head style is Countersunk Phillips Flat - This will allow the fastener head to lay flush in the base material. The Diameter is 1/4", The Overall Length is 1.25", The Thread Length is .83", The number of Threads is 6. [Setting Driver Required & included in each box of Anchors] FOR 1/4" - a 5/16" nut driver is required for driving the anchor into the base material. FOR 1/4" - Each Tapcon style Blue Screw requires a 3/16" hole to be drilled in the base material (Concrete, Block, Brick & Wood). The hole should be drilled with the carbide tipped bit that is included in each box [Minimum Embedment] The Minimum Anchor embedment into the Base Material is 1". This means the Anchor must be installed so that a minimum of 1" of the anchor is embedded into the Base Material. [Fixture Hole Diameter] FOR 1/4" - The hole in the Fixture or Base Material being Fastened must be Larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16". [Spacing between Anchors] Each anchor must be spaced a Minimum Distance of 4" from each other Anchor when measured center to center. [Edge Distance] FOR 1/4" - Each anchor Cannot be installed any closer than 3" from an unsupported edge of the concrete. [Maximum Fixture Thickness] The Maximum Fixture Thickness or the Maximum Thickness of the Material being Fastened for a anchor is 0" to .25". This will ensure that the Minimum Embedment of 1" will be met FixMaster, the unrivalled "Master" of fixings, is creating waves in the Fixings and Fastener space with its superior product quality and unparalleled service. From DIY enthusiasts to seasoned professionals, FixMaster stands out as the go-to brand, showcasing its mastery in delivering fixing solutions you can count on! You will love the durability of our Tapcon style Concrete screw! Visit our website for further technical information and to learn about the FixMaster offering https://www.myfixmaster.com/