Hantek Digital Storage Oscilloscope USB 150MHz Bandwidth, 2 Channels, 1GSa/s Sampling Rate, with 1 CH Waveform Generator(DSO2D15)

Hantek Digital Storage Oscilloscope USB 150MHz Bandwidth, 2 Channels, 1GSa/s Sampling Rate, with 1 CH Waveform Generator(DSO2D15)

【Cost-effective Economy Oscilloscope】Dual channels,150MHz bandwidth, 1GSa/s sampling rate, 8M memory depth, can upgrade the system through the USB port. Support plug-and-play USB storage devices and communicate with the computer and remote control through USB. 【Signal Generator】With built-in 1 CH 25MHz waveform generator, support arbitrary waveform output. Users can edit the arbitrary waveform or choose the regular waveform such as Sine, Ramp, Square, Exponent, Noise, DC and Arb waveform. 【Easy to Observe】 Equipped with 7 inch color TFT LCD disply screen, with a resolution of 800 * 480 pixels, it can clearly show the measured waveform. Support 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation and etc.; 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes. 【What You Will Get】1 x Oscilloscope, 2 x Oscilloscope Probe, 1 x USB Cable, 1 x Power Cable, 2 x BNC to Alligator Clip Cable, 1 x Car Voltage Tester, 1 x Multimeter Test Leads Kit, 1 x 40 Pin Male to Female Jumper Wire（10cm） Hantek Digital Storage Oscilloscope USB 150MHz Bandwidth, 2 Channels, 1GSa/s Sampling Rate, with 1 CH Waveform Generator(DSO2D15)

Features:
1. 2 channels which are respectively controlled by independent knobs
2. 150MHZ analog channel bandwidth
3. Sampling rate up to 1 GSa/s
4. 8M memory depth
5. Vertical range 2mV/div ~ 10V/div
6. Built-in 1 CH 25MHz waveform generator
7. Vertical resolution: 8bit
8. Trigger: Edge, Pulse,Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
9. BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN
10. Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures
11. A 3-digit digital voltage meter and a 6-digit hardware frequency indicator
12. 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation and etc.
13. 2 sets of digital voltmeters
14. Support threshold testing, free measurements within the screen
15. Abundant SCPI remote command control
16. USB Host/Device


Specification:
Bandwidth: 150MHz
Channels: 2
Sample rate: 1GSa/s (single channel) 500MSa/s (two channels)

-----Arbitrary waveform generator-----
Channel: 1
Sample rate: 200MSa/s
Vertical resolution: 12 bits
Maximum frequency: 25 MHz
Standard waveforms: sine, square, ramp,Exp, noise, DC
Arbitrary waveform: Arb1, Arb2, Arb3, Arb4

-----General specifications-----
Display type: 7'' diagonal TFT liquid crystal
Display resolution: 800 (horizontal)*480 (vertical) pixels
Display colour: 16 million colours (24 bits true colour)
Standard interface: USB Host，USB Device
Power supply: 100-120VACRMS(±10%), 45Hzto 440Hz, CATⅡ
120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ
Operating temperature: 0~50 °C (32~122 °F)
Storage temperature: -40~+71 °C (-40~159.8 °F)

Package Including:
1 x Oscilloscope
1 x USB Cable
2 x 150MHz Probe(PP-150B)
2 x BNC to Alligator Clip Cable
1 x US Standard Power Cable
1 x Car Voltage Tester
1 x Multimeter Test Leads Kit
1 x 40 Pin Male to Female Jumper Wire（10cm