Slab Flattening Router Bit 1/2 Shank, 6-Wing, 2" Cutting Dia, Insert Carbide CNC Spoilboard Surfacing Router Bit, Wood Planer Planing Bit for

Slab Flattening Router Bit 1/2 Shank, 6-Wing, 2" Cutting Dia, Insert Carbide CNC Spoilboard Surfacing Router Bit, Wood Planer Planing Bit for

Precise Size: SICWOOD slab flattening router bit with 1/2 Inch shank, 2" Cutting Diameter, Carbide Inserts: 12*12*1.5 mm, 6-Wing, The Max RPM 18,000, the universal Inserts provide on asin "B0CZ8WLD4C " 6-Wing Cutting Smoother: This CNC spoilboard surfacing router bit uses solid carbid blade, high hardness, sharpness of blade, smoother cutting, Great for flattening wood. Important Safety Note: This 2" (6-wing) flattening bit operates at high RPM and requires precise setup. Check all six carbide inserts for flatness and tightness before use—small deviations (1/32") may cause imbalance and vibration. Test-run below 10,000 RPM first, then increase gradually. Never exceed 18,000 RPM. Use a router with at least 2 HP for safe operation. ensure both safety and a quality slab surface. Efficient & Economical: This flattening router bit with replaceable 4-sided carbide Inserts 1.5mm thickness, more Durable and Sharp than other carbide blade, longer life, it is a cost-effective solution. Cutting Material: Used on planing and rabbeting the following materials: MDF/Plywood /Chipboard /Plastic /Acrylic / Fiberboard/Balsa/HDU Board /HDF/LDF / Epoxy (Epoxy Resins) / Hardwood/Softwood FOR Equipment: Use on router sled for flattening slabs, and other CNC machine. Make sure that your router sled rails are fully stable and squared, Make sure the screws are tight Slab Flattening Router Bit 1/2 Shank, 6-Wing, 2" Cutting Dia, Insert Carbide CNC Spoilboard Surfacing Router Bit, Wood Planer Planing Bit for Flycutter/ Slab Leveler/ Rabbeting by SICWOOD