GEYOPMID Bicycle Motor Kit, 1000W 48V 500RPM Bike Engine Kit with 3 Hall Sensors 20" E-Bike Front Wheel Frame Kit Brushless Gearless Hub Motor Kit

GEYOPMID Bicycle Motor Kit, 1000W 48V 500RPM Bike Engine Kit with 3 Hall Sensors 20" E-Bike Front Wheel Frame Kit Brushless Gearless Hub Motor Kit

【Complete kit】This is a complete wheel motor kit, so the parts are more adaptable and have better performance. The speed of this bicycle motor kit can reach 500rpm and a no-load speed of 29.82mile/h, which motor for bicycles kit can make your ride easier.(Please note 20" size is based on tires fitted, wheel hub size is as per pictures.) 【High Efficiency】This brushless and gearless motor is more efficient due to its high power of 1000W and an available efficiency of more than 82%. The friction of this front wheel motor is greatly reduced when running because it has no brush and gear so it can run more smoothly even on irregular roads, which will release lower noise during operation. And it has a low maintenance cost. 【Controller Bag】This bicycle engine kit is equipped with a powerful controller to ensure a high current supply. This e bike conversion kits is equipped with a controller bag, which can store the controller. The motor's power supply can be cut off automatically when braking, which not only saves energy, but also increases safety and makes riding more secure. 【Hall Sensors】E bike kit is equipped with 3 Hall sensors, which detect the magnetic field of the motor and the motor's movement speed to facilitate the driving of the motor for a more powerful start and a smoother ride. 【Power Indicator Light】With three power indicators on the handle. The green light will be on when the power is sufficient, while the yellow or red light will remind you that e bike conversion kit is time to recharge.

Specification

Material: Aluminium + Iron + Magnetic Steel

Color: Black

Voltage: 48V

Power: 1000w

Rated Speed: 500 rpm

Rated Torque: 45 N.M

Motor Type: Brushless Gearless Motor

Brake: 6 Screws Fixed Model Disc Brake

Corresponding Controller: 48v1000w Controller

Efficiency: ≥82%

Travel Speed: 48km/h Unladen(29.82mile/h)

Suspension Type: Front

Motor Diameter: 420mm/16.54in

Motor Shaft Length: 200mm/7.87in

Motor Cable Length: 100cm/3.93in

Wheel Diameter: 445mm/17.25in

Motor Width: 82mm/3.263in

Number of Hall Sensors: 3

Body Size of Magnet: 13.65*3*30mm/0.53*0.11*1.18in

Flat Fork Width Requirement: Min.135mm/Min.5.31in

Suitable Wheel Size: 50*10cm/20*4in

Packing Size: 50*50*28cm/19.68*19.68*11.02in

Gross Weight: 11.5kg/25.35lbs

Net Weight: 10kg/22lbs

Package Included

1* Wheel Motor 

1* Controller 

1* Turnbuckle

2* Brake Handles

2* Handles

1* Assist Sensor

1* Controller Bag

1* English Manual

All Accessories for Installation

Notes

1.This set does not include tires and needs to be purchased by the customer. The suitable tire size is 20*4in.

2. Please make sure to use lead-acid or lithium batteries of the appropriate voltage (48V).

3. It is suitable for two-wheeled bicycles, not for three-wheeled or multi-wheeled vehicles.

4. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.