JRSHOME 2024 9" x 1/2" x .095" Urethane Band Saw Tires for Delta 28-150 BS100 SM400 for Craftsman 137.21409 137.214130 113.24458 315.214770

JRSHOME 2024 9" x 1/2" x .095" Urethane Band Saw Tires for Delta 28-150 BS100 SM400 for Craftsman 137.21409 137.214130 113.24458 315.214770

Compatible Models: For Delta 28-150 BS100 SM400 for Craftsman 137.21409 137.214130 113.24458 315.214770 for Grizzly G1052 Black & Decker BDBS100 BS700 for Ryobi BS901 ProTech 3203 for Shopfox: W1749, W1750, T20837, for Wen 3939T, Also fits for any band saw that needs a 9" x 1/2" x .095" tire Size: Urethane Bandsaw Tires 9" x 1/2" x .095" Fitment: They can be installed on any 9" band saw that requires a 1/2" wide and 3/32" thick tire Premium Quality: Band saw tires most certainly outlast rubber band saw tires and plastic band saw tires. Urethane band saw tires will not dry rot like rubber or plastic tires.Thus improved performance and safety to reduced downtime Easy installation: no adhesive is needed for proper installation. Urethane tires are specifically designed to stay in place without any type of adhesive and can be stretched to fit. This makes them even easier to install and even easier to remove if necessary Fitment:
For Delta 28-150 BS100 SM400 Craftsman 137.21409 137.214130 113.24458 315.214770 for Grizzly G1052 Black & Decker BDBS100 BS700 for Ryobi BS901 ProTech 3203 for Shopfox: W1749, W1750, T20837, for Wen 3939T, Also fits for any band saw that needs a 9" x 1/2" x .095" tire

How to install
First, After disassembling old "tires", clean up the gummy debris left on the wheels.
Mounting:
Used a clamp to hold the tire on the wheel in one spot, and then used a screwdriver to pry the rest of the tire on. This made installation relatively easy.
Uniform stretch:
After mounting, removed the clamp and pushed the shaft of the screwdriver completely under the tire, so it was between the tire and rim.
Then ran the screwdriver around the wheel several times to make sure the tire was uniformly stretched around the wheel.
Seating the tire:
Next, made sure the tires were properly seated in the groove on the wheels, rolled the wheel on a concrete floor, pushing down pretty hard with your hands, so the concrete would forced the tire into the groove.
After mounting, reinstalled the wheels and readjusted everything, finish!
Note:Urethane band saw tires no adhesive needed, but need to be stretched on. If your new band saw tire is too tight to fit onto the wheel, submerged the new tire under hot water for a few minutes, this will make things easier.