SDJKAA Minimalist Retro Style Wallpaper, Black, 53cm x 10M, Geometric Pattern

SDJKAA Minimalist Retro Style Wallpaper, Black, 53cm x 10M, Geometric Pattern

High quality materials, natural pulp fibers extracted from pure natural plants, good breathability, and more environmentally friendly; Beneficial for wall breathing, greatly extending its lifespan. Effectively reducing light, softening light, and protecting eye reflection is an ideal and very practical wallpaper. Usage: Living room, bedroom, study, background, children's room, TV hotel, office wall renovation. This wallpaper has not been pre pasted and requires the use of glue and paste (not included). Kind reminder: It is recommended that you purchase sufficient quantities at once to ensure that they come from the same batch and avoid color differences. Must Read:
Wallpaper glue is not included, but can be purchased from your local hardware store.
Color tones can vary due to lighting in the room, pictures on wall for reference only.
To avoid color shade difference on wall, order in one time to make sure they are from the same lot/batch.
Better to BUY ONE MORE ROLL in case of extra waste and can keep as spared use.
Specification: 53cm*10M

How to use wallpaper?
Step 1: Prepare the wall
The walls must be completely flat, clean, and dry. Smooth out rough surfaces, uneven holes, and uneven areas.
Step 2: Prepare wallpaper
Measure the height of the wall with a ruler. If it is lower than the height of the mural in the photo, it must be cut to make it suitable. Cut it when placing it on the floor, but leave one inch of space to correct the horizontal difference on the wall.
Step 3: Prepare the glue
You can purchase glue from the supermarket and make it slowly. This way, you will obtain a uniform mixture without any bubbles.
Step 4: Stick the paper onto the wall
Use a brush or paint roller to evenly apply glue to the wall. Apply from the marked line until it is perpendicular.
Starting from the top left corner, stick the first panel of the mural onto the wall. Check if it aligns with the guidelines.
Press the paper with a dry roller or sponge to eliminate any air bubbles.
Step 5: Complete
Adjust the sides, top, and bottom of the wall as needed using a ruler and cutting tool.
Let it dry for 24 hours; You will get the perfect final result