Yokoma Floor Grinding Machine Cement Ground Grinder Grinding Epoxy Floor Paint and Cement Floor Polishing Foldable Handle 220V

Yokoma Floor Grinding Machine Cement Ground Grinder Grinding Epoxy Floor Paint and Cement Floor Polishing Foldable Handle 220V

Application：The grand grinder is mainly used for grinding concrete, stone, and epoxy floors. Can effectively polish the original ground concrete surface and old epoxy floor. Flexible and efficient.The working depth of the floor polisher is 0-3mm, which is adjustable. Grinding Disc: The plate and grinding head can be replaced for grinding, polishing, rust removal and paint removal. According to your needs. The grinding heads included are round diamond grinding head * 3，50-mesh resin grinding disc*3, 1000-mesh resin grinding disc *3, sandpaper *3. Excellent Design: The floor grinding machine is equipped with a grinding chassis which can be rotated locked in four directions for flexible use. With lifting hand wheel to adjust the height of the chassis when the ground is uneven. With Powerful Motor：The 220V 2.2KW pure copper motor with rotating speed of 280rpm, which is efficient and durable. Note: when using, first lift the machine head off the ground,and then turn on the switch. After the grinding chassis rotates, gently place it on the ground. Easy Operation: The arms are foldable and can be adjusted to a suitable height when in use. The ground grinder is equipped with metal handle on the chassis for easy operation. With fence around the chassis to reduce dust splash. Parameters
Voltage: 220V
Working width: 280mm
Work Depth：0-3mm
Motor power: 2.2KW
Speed: 1430 RPM
Weight: 169lbs Notes
1. The input voltage should not be too low.
2. When using, first lift the machine head off the ground, and then turn on the switch. When the machine head rotates normally, gently place it on the ground.
3. When working, the machine head swings left and right, then moves forward, and cannot stop in place.
4. In case of power failure during operation, the switch should be reset and cannot be stopped at the original position to avoid burning the motor when the power is on.
5.If a generator is used to provide power, the output power of the generator must be at least 7KW.