GSCIT Club White Edge Banding, 1 1/2 inch x 50ft Melamine Edge Banding with Hot Melt Adhesive Preglued Cabinet Edge Banding Flexible White Veneer

GSCIT Club White Edge Banding, 1 1/2 inch x 50ft Melamine Edge Banding with Hot Melt Adhesive Preglued Cabinet Edge Banding Flexible White Veneer

√【BRAND GUARANTEE】- GSCIT Club is a company specialized in Edge banding. √【HIGH QUALITY】- The edge banding is made of high quality melamine material, which is durable and elastic, with a smooth surface and not easy to be dirty.When you repair Laminate and Cabinets, Melamine Edge banding will be your first choice. √【UPGRADE DESIGN】- The size of Edge Banding is 1 1/2 inch x 50ft, and the thickness is 0.6mm, It's suitable for your daily needs. Edge Banding is a strip of wood veneer with heat melt adhesive pre-applied to the back. You simply hold the edge banding in place, then run over it with a heated iron. After cooling, please press it with your hand and trim off the sides with the Utility Knife, 0.6mm thickness can let you easy to do. √【WIDELY USED】- Our design is high quality & fashionable, This Edge Banding were doing market research which is matching most customer favorites. Melamine Edge banding is a thin material used to seal the sides, such as plywood, particle board or MDF, increasing durability and a new look. It can update your desk, cabinet, DIY and the other furniture, the edging will give a smooth and clean surface to it. √【SERVICE GUARANTEE】- Any defective problem happened on our edge banding, we promise to send you a same new veneer edging for replace or refund . Have any questions and suggestions? Just contact us by email. Our customer service team is always be here to help you solving the problem within 24 hours. What Is Edge Banding
Edge banding?is a thin material used to seal the and raw edges of?plywood.
Heat sensitive adhesive on one side is applied to the board while the other side acts as a barrier against dirt and moisture.
Edgebanding?is mainly done to cover?plywood sides?in order to match a?cabinet’s finished look, but it also protects the?inner plywood?from possibly warping.

Overview:?Benefits And Edge Banding Materials
Edge banding is a strip of wood veneer with heat sensitive adhesive on one side.
With a roll of wood veneer edge banding and a few simple tools, you can cover raw plywood edges so the plywood is nearly indistinguishable from solid wood.
Iron-on edge banding is wood veneer with hot-melt adhesive preapplied to the back.
You simply hold the edge banding in place, run over it with a household iron to heat the adhesive, let it cool and trim the edges flush.

How To Use: (With Hot Melt Adhesive)
Tip 1:?Clean up the edges
Tip 2:?Iron on the edge banding
Tip 3:?Press it while it's hot
Tip 4:?Slice off the ends
Tip 5:?Use a trimmer on edges
Tip 6:?Modify your trimmer
Tip 7:?Don't leave a splice where it'll show
Tip 8:?Touch up with a sanding block

Colour: White
Size: 1 1/2 inch x 50ft
Thickness: 0.6mm
Material: Melamine
Quantity: 1 Roll