Fabric Sampler Cutter, Round Sample Cutter 100 Sqcm Fabric Circle Cutter Cloth Sample Disk Cutter for Cloth Device Weight Instrument Sampler Paper

Fabric Sampler Cutter, Round Sample Cutter 100 Sqcm Fabric Circle Cutter Cloth Sample Disk Cutter for Cloth Device Weight Instrument Sampler Paper

PORTABLE TO USE: The bottom of the cloth sample disk cutter has a straight line notch, which is used to fix the sample, which is convenient for cutting and prevents the sample from slipping EASY TO USE: The round sample cutter, imply place the fabric on the rubber mat, position the disc sampler, lock it in place, rotate 90 degrees, and apply pressure with one hand while turning the corrugated hand wheel CUTTING AREA: The fabric sampler cutter cutting area of the sample cutter is 100 square centimeters, multiply the weight of the cut sample by 100 to easily calculate the weight per square meter WIDE APPLICATION: The fabric circle cutter used to cut all kinds of textiles, carpet, cardboard include: Wool fabrics, cotton fabrics, man-made fabrics and knitting products NOTE: The bottom of the textile sample cutter has ruled nicks, for fixed specimens, easy to cut, to prevent the sample from slipping, note: The knife blade sharp instrument, not the use of the hand on the bottom, so as to avoid damage Condition:Brand New
Item Type: Sample Cutter
Sampling area: 100 square centimeters


Instructions:
1. Lay the fabric to be cut on the rubber mat, place the disc sampler on the fabric, pull out the lock on the sampler, rotate it about 90 degrees, hold the outer cover with one hand, and hold the corrugated handwheel with the other. Apply a certain pressure, and then turn the corrugated handwheel clockwise (the angle of rotation is greater than 90 degrees) to cut the round sample.
2. After the sampler is used, lock the device and rotate it to the original position so that the blade cannot be exposed to avoid hurting hands and other objects.

Structural Adjustment:
1. The cutter blade is a double-sided blade and there are four pieces, which are distributed in four equal parts of the circle. The blades can be replaced. The specific is: loosen the cross screw (four screws on each piece), and remove the blade pressure plate and sampling blade , Replace with a new blade, press on the blade pressure plate, pay attention to make the blade edge clockwise tangential, and make the four blade edges on the same plane, and then tighten the cross screws.
2. The bottom of the instrument has a straight line notch, which is used to fix the sample, which is convenient for cutting and prevents the sample from slipping.

Package List：
1 x Sampling Cutter
1 x Pad

Note:
1. The blade of this instrument is incisive, so don't put your hands on the bottom during use to avoid damage.
2. The sample cutting of the instrument should be carried out on a rubber pad, and the instrument should be wiped clean when not in use and placed in the instrument box to avoid damage.
3.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.