500W JT-19 Dental Wet Model Trimmer, Wheel Dental Lab Equipment Wet Model Shaping Trimmer Abrasive Machine Gypsum Arch Inner Disc Wheel Dental

500W JT-19 Dental Wet Model Trimmer, Wheel Dental Lab Equipment Wet Model Shaping Trimmer Abrasive Machine Gypsum Arch Inner Disc Wheel Dental

【Main Parameter】 Voltage: 110V/60Hz±10%; Dental Wet Model Trimmer Power: 500W; Rotational Speed: 2800 rpm; Dimensions: 44×35×35cm (17.3x13.7x13.7 inch); Weight of the De-ntal trimmer: 20kg (44lbs). 【High Quality】This unit is made of rust-proof all-cast aluminum which enables the users to achieve perfect trimming quality. They feature heavy construction and balanced direct-drive systems that run quietly, and stay steady and trouble-free while performing on the job. 【Notice 1】When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18) 【Notice 2】To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet) 【Professional Applications】Model Trimmer is widely used in restorative dentistry.It is a necessary tool for trimming plaster models,This machine is made of rust-proof all-cast aluminum which enables the users to achieve perfect trimming quality.

Features: 

1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve

2. Connect the waste-disposal tube to the unit

3. Connect the power cord, and switch on the power switch (O=off, l=on)

4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)

5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)

Attention:

If there is some abnormal noise when working on

Possible reason: ① Axon is loosing ② Disc is not plain enough

How to solve it: ①Dissemble the disc⒃ with spanner, make the snap

Ring tightly; ② change the disc

The machine does not work when power on

Possible reason: ① fuse get burnt；② motor get burnt；③ switch get wrong

How to solve it: ① change the fuse（22） which inside the socket；② change the motor ③ change the switch

Specifications

Voltage: 110V/60Hz

Power: 500W Rotational Speed: 2800 rpm

Dimensions: 44×35×35cm Weight of the trimmer: 20kg

Package Included:

1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Lab Equipment