48" Hardwired Power Strip (NO Power Cord), 12 Vertical Tamper Resistant Outlets (NEMA 5-15R - NOT 20Amp), with Ears (with mounting tabs on Both Ends),

48" Hardwired Power Strip (NO Power Cord), 12 Vertical Tamper Resistant Outlets (NEMA 5-15R - NOT 20Amp), with Ears (with mounting tabs on Both Ends),

48" Hardwired Power Strip, 12 Vertical Tamper Resistant Outlets (NEMA 5-15R), White With EARS on both Ends, Total Length 49.33″/1253mm Measurement: L48″ x W1.61″ x H1.41″ (1219 x 41 x 35.8mm); Casing/Outlet Height: 1.16"/0.25" (29.5/6.3mm) No Power Cord - Hardwired and to be Mounted at Your Desired Location. Installation Instruction Included 125V/15A/60Hz (14/3 AWG Wiring); Recommended Max Load 1440W (NOT a 20 Amp Unit) ETL Approved and Listed (Conforms to UL 5 and CAN/CSA C22.2 No. 62) 6 Easily Punched off Knockouts, 1 on Each Side - (Top/Bottom Cover, Both Sides/Ends) Great for Contractors, Electricians and Installers, as well as DIYers 48" Hardwired Power Strip with 12 TR Outlets - * NOTE: Measurement is approximate: For installation purpose, the length of the power strip unit does not include ears, (mounting tabs 0.67" / 17mm on each end). For models with ears, 2 x 0.67" / 17mm need to be added to the product length in the dimension listed above; the width does not include the size of screws (min. 0.06" / 1.5mm) on each side; the height (or thickness) does not include the receptacles (Regular Outlets: 0.19" / 4.9mm; TR Outlets: 0.25" / 6.3mm) above the surface of the casing, please consider Adding 0.12″/3mm in Height if Clips are to be used. - SAFETY WARNING: - Installation work of this unit must be done by a professional, a licensed electrician or an electric engineer. - Never install this unit during a thunder storm. - Switch off the power before you start installation work. - This unit is for indoor use only. - This unit is not intended for use in or around wet or potentially wet areas including, but not limited to, aquariums, saunas, showers and fountains.