4pcs Front Rear Aluminum(6061 T6) Wheel Spacer Adapter 8 to 10 Lug Hub Centric Wheel Adapters For 2011-2023 Silverado 3500 DRW,2011-2023 Sierra 3500

4pcs Front Rear Aluminum(6061 T6) Wheel Spacer Adapter 8 to 10 Lug Hub Centric Wheel Adapters For 2011-2023 Silverado 3500 DRW,2011-2023 Sierra 3500

[Fitment]:Bolt Pattern 8x210mm to 10x285.75mm Front Rear Wheel Spacers Adapters with Lug Nut Compatible With 2011-2023 Silverado 3500 Dually Drw,2011-2023 Sierra 3500 Dually Drw [Wheel Adapter Function]: This Wheel Adapter Allows You To install Big Rig Semi 8 to 10 Lug Wheels On Your Truck,such as 22", 22.5", 24", 24.5", 26", 28", 30",This Wheel adapters can also increase tire to frame clearance to allow installation of lift kits and or wider/larger wheel set up. [Material]: Made from High Quality 6061 T-6 Aluminum,Very sturdy and light.Raw anodized aluminum wheels can offer more resistance to impact cracks.They can also be more resistant to damage from deicers,gravel and brake dust,making them more popular for winter driving.The surface has been giving a coating that will protect the surface against corrosion. [Feature]: By spacing the wheel apart,Our hub ring adapter will provide more stability to the vehicle and corner better.It can make the car at high speed,speed cross-country more secure and stable.with the bolt on installation design,it is easy to operate for your trailer.This Adapters widen your stance and push your wheels out,similar to spacers,however,they also allow you to install a wheel with a different bolt pattern.This effectively allows the vehicle to fit a wheel with a different bolt pattern. [Intallation]: Make Sure You Get 5-7 Turns Before Tightening,Confirm the back of the adapter sit flush against the vehicles hub,You will then use the extra lug nuts to mount you wheels on to the adapters.Please Make Sure You Take The Proper Measurements Before Purchasing. INSTALLATIONL: Professional Installation Recommended We recommend getting these adapters installed by a trained professional, but it is not necessary. Make Sure You Get 5-7 Turns Before Tightening Must be torqued down to factory specs. No Gap In Between The Adapter And Hub The back of the adapter must sit flush against the vehicles hub. Full Set Of Lug Nuts Included To Mount The Adapters You will then use the extra lug nuts to mount you wheels on to the adapters. Please make sure your torque them down to factory specifications. Vehicles Studs Cannot Pass The Face of The Adapter If the studs do pass the face of the adapter, you will need to grind/cut them shorter. (This only applies to 1.5" adapters & smaller). Please Make Sure You Take The Proper Measurements Before Purchasing If you are not sure, you can always email us and we will point you out to the right direction. We will be more than happy to help and get your order correct the 1st time. No Returns or Exchanges Once They Have Been Installed