LOTOS LTP6300D 63AMP Non-Touch Pilot Arc Plasma Cutter, Drag Cut Enabled, 3/4" 19mm Clean Cut, 1" 25mm Severance Cut, Non-HF Arc Start Metal Cut

LOTOS LTP6300D 63AMP Non-Touch Pilot Arc Plasma Cutter, Drag Cut Enabled, 3/4" 19mm Clean Cut, 1" 25mm Severance Cut, Non-HF Arc Start Metal Cut

63A Cutting Power — Up to 3/4" Clean, 1" Severance: For auto-body patch panels, farm/ranch maintenance, trailer frames, HVAC ducting, metal art, and small-shop fabrication; cuts stainless, alloy/mild steel, aluminum, and copper. Non-HF Blowback Start + Pilot Arc: Stable arc through painted, rusty, or expanded-mesh metal with reduced EMI—cleaner starts and more consistent pierces on shop floors and job sites. Drag-Cut Ready: Glide the torch directly on the workpiece for smooth templates and freehand lines; use LOTOS DC6309 drag consumables (sold separately) for best results. Large LED Controls: Pilot-Arc Time (6–15 s) for grates/mesh; Post-Flow (2–10 s) helps cool and extend torch life; input-pressure reminder keeps kerfs consistent. Input Power & Air: Automatic dual voltage 110–125V / 215–245V; recommended breakers 50A @120V / 40A @240V; clean, dry air ≥70 PSI @ 4.0 SCFM. Output & Cutting Capacity: 220/240V: 20–63A DC (up to 3/4" clean; 1" sever). 110/120V: 20–35A DC (up to 3/8" clean; 1/2" sever). Consumables Compatibility: Works with LOTOS NCON series (NCON21: B07GC8ZC4D; NCON17: B08P7XY9R9; NCON12: B07GC9HTDJ; NCON02: B07GC8488X) and Drag-Cut DC series (DC6309: B0DY9Y9QWL). Cut more, set up faster—meet the LOTOS LTP6300 63A Plasma Cutter.

Engineered for everyday fabrication and on-site repairs, LTP6300 pairs non-HF blowback start with pilot-arc control to maintain a stable arc through painted, rusty, or expanded-mesh metal—while keeping EMI low for shop environments.

• 63A capacity: Up to 3/4" (19 mm) clean cuts and 1" (25 mm) severance on 220/240V; works with stainless, alloy/mild steel, aluminum, and copper.
• Non-HF start + pilot arc: Reliable starts on coated or mesh materials with reduced interference; cleaner pierces and smoother kerfs.
• Drag-cut ready: Trace templates or freehand lines right on the workpiece. Use LOTOS DC6309 drag consumables (sold separately) for best results.
• Large LED controls: Pilot-Arc Time (6–15 s) for grate/mesh; Post-Flow (2–10 s) cools and extends torch life; Input-Pressure reminder keeps cuts consistent.
• Quick setup: Pre-installed NPT 1/4" Type-D plug and air filter-regulator; 14-ft torch with central connector for reach and rapid swaps.

Best for: auto-body patch panels, trailer/RV repairs, farm equipment maintenance, HVAC ducting, metal art, and small-shop fabrication.

Power & air: Automatic dual voltage 110–125V / 215–245V. Output 20–63A DC (220/240V) or 20–35A DC (110/120V). Recommended breakers: 50A @120V or 40A @240V. Requires clean, dry air ≥ 70 PSI at 4.0 SCFM.

Consumables: Compatible with LOTOS NCON series (NCON21: B07GC8ZC4D, NCON17: B08P7XY9R9, NCON12: B07GC9HTDJ, NCON02: B07GC8488X) and Drag-Cut DC series (DC6309: B0DY9Y9QWL).

Note: Cutting performance varies with material type, condition, and operator technique. Use non-hazardous compressed air for safe operation.