Profelinx Gym Cable Accessories, Nylon Ball Stopper Replacement, Eyelet Cable Terminal Interface Port, Wire Rope Joint Interface Replacement Port,

Profelinx Gym Cable Accessories, Nylon Ball Stopper Replacement, Eyelet Cable Terminal Interface Port, Wire Rope Joint Interface Replacement Port,

Size & Fit: Our cable terminal fit for cable of 3mm steel core. With an 45mm long and 11mm eyelet hole, compatible with gym cables that have a 3mm internal steel wire core. Durable Material: Made of strong metal alloy for reliable performance. These terminals are built to withstand tension and wear in fitness cable systems. Easy Installation: Use a hydraulic crimper tool to attach the cable core to the terminal. For old cables, remove the existing terminal before installation. Versatile Use: Ideal for home or commercial gym setups. A practical solution for cable repairs or custom setups using steel wire rope. Package Content: Includes 10 metal cable terminals designed for gym equipment. Suitable for replacing or installing steel wire rope ends in exercise machines. Pulley Machine Cable Ball Stopper Replacement, Wearable Nylon Ball Stop for Cable Machine Gym Machine Smith Machine Weight Lifting Cable Ball Terminal (2 Ball-Sets)

USER INSTRUCTION:
-For a new cable, use cable to go through the hole of ball (and set other parts in right position if there are), peels a small section of plastic cover (if there is) of the cable. when connect it to a metal eyelet terminal, use a hydraulic crimper (plier) tool to squeeze the connecting part.
--if you don't use a eyelet terminal, but make the cable with a loop end, you can use a wire rope clamp or crimping loop sleeve on the cable to fasten it. you need a spanner or hydraulic crimper to process it.
- For an old cable, firstly you need to cut off the end of the cable (where there is a eyelet or loop terminal), then use cable to go through the hole of ball (and set other parts in right position if there are), and process it just same as a new cable we mentioned above.

Q&A from users
- Q: How to install the ball stopper?
- A: This is mostly for use with a new cable. The cable has to be went through the hole of the ball. Since most cables have loops at their ends, to install this on a cable that's already in service, you'd have to cut the loop off. But then the cable wouldn't be serviceable. You can get the cable and end-fittings from Home Depot, so replacing most cables is pretty easy.
- A: In my case, I had to remove the existing cable from the machine by unbolting the cable from where it was attached to the frame. I then threaded the new rubber stopper onto the cable and then ran the cable through the pulley system and back to where I had removed the cable from the frame of the machine.