500W 50A 50Hz Handheld Spot Welder Portable Metal DIY Welding Tool Output Power Adjustable 0.02-0.05 inches Welding Point Diameter for Jewelry Repair

500W 50A 50Hz Handheld Spot Welder Portable Metal DIY Welding Tool Output Power Adjustable 0.02-0.05 inches Welding Point Diameter for Jewelry Repair

Stable Performance: With a quality capacitor, strong resistance to grid fluctuations, and a great voltage stabilization effect, this machine has a more stable welding performance that is less prone to arc breakage. High Efficiency: Adopting the principle of high-frequency plasma discharge and 500W high power, this welding machine ensures smooth solder joints with uniform texture, thus improving welding efficiency. Adjustable Power: You can adjust the output power according to the size of the welding wire through the coarse and fine-tuning knobs, ensuring smooth and efficient welding. Adjustable Power: You can adjust the output power according to the size of the welding wire through the coarse and fine-tuning knobs, ensuring smooth and efficient welding. Small Footprint: It is compact(8.46*11.8*5.7 inches) and suitable for various countertops while taking up a small area.

Specification

Color: Blue

Model: DH-670

Material: Metal

Process: Baking Paint

Drive Type: Foot Pedal

Assembly Required: Yes

Shape: Rectangular

Plug: US Standard

Power Source: Corded Electric

Power Form: Pulse

Power: 500W

Voltage: 110V

Current: DC 50A

Max. Welding Diameter: 0.5-1.2mm/0.02-0.05in

Product Size: 21.5*30*14.5cm/8.46*11.8*5.7in

Package Size: 41*23*17cm/16.14*9.06*6.69in

Gross Weight: 5.7kg/12.57 lbs

Package Included

1* Spot Welding Machine

1* Foot Pedal

1* Pedestal

1* Handle

1* Power Cord

1* Fixture

1* Tungsten Needle

Notes

1.Please check whether the power supply matches the voltage. The machine power supply should be plugged into the primary power supply socket, not into the secondary power supply socket (e.g. electric plug).

2.The welding test must be tested on the weldment. Please try to avoid triggering the switch without the weldment. During the welding test, the current should be adjusted from small to large.

3.During the welding process, the workpiece must not be located in the tip of the tungsten needle or step on the pedal, which may lead to a short circuit of the machine.

4.Two electrodes and welding needles should not touch each other to avoid short circuits. Please do not step on the pedal for too long, just step on it once and then start immediately, otherwise, it will be easy to short-circuit.

5.Please don't put the machine in a wet place and please keep it dry. Please do not touch it with wet hands. Please have the machine maintained by professional workers.

6.Strong light will be released when welding. Please wear protective glasses (not included) and do not look directly at the welding part when welding.

7.Please keep the electrode clean. After working a while, it is recommended to sharpen the needle to remove impurities before continuing to use it.

8.Please read the operating manual completely before use and pay particular attention to the safety instructions included.