50 Amp Load Manager Smart Management Module Control Board Compatible with Generac 7000, 8-Zone Control, Overload Protection and Lock Feature — NC and

50 Amp Load Manager Smart Management Module Control Board Compatible with Generac 7000, 8-Zone Control, Overload Protection and Lock Feature — NC and

NC and NO switching— Between the brown and black modules sits a 4-pin header that enables switching between NC (Normally Closed) and NO (Normally Open) modes. You may cover pins 1-2 or pins 3-4 with a cap to select the required mode according to your specific needs. The circuit board defaults to a normally closed (NC) state. Incorrect usage may result in the following issues: （Power does not transmit through the board. It operates opposite to what you expect) Please switch the circuit board to the normally open (NO) state. Crit Load Priority— Supports priority configuration (Level 1-8) for critical loads like medical equipment and refrigeration systems. Automatically isolates non-priority circuits during power outages. Multi-Module— Connect up to 8 smart management modules per system, enabling cost-effective backup power and flexible management of multiple loads. LED Status Mon— Check load status instantly via visible LED lights. The Load Manager's lock-out system blocks non-essential loads during generator use to prioritize critical devices. The circuit board defaults to a normally closed (NC) state. Incorrect usage may result in the following issues: （Power does not transmit through the board. It operates opposite to what you expect) Please switch the circuit board to the normally open (NO) state. NC and NO switching— Between the brown and black modules sits a 4-pin header that enables switching between NC (Normally Closed) and NO (Normally Open) modes. You may cover pins 1-2 or pins 3-4 with a cap to select the required mode according to your specific needs.