DoinMaster Metal Solar Address Signs for Yard with Warm White & Cold White - 50 Customizable (from 0 to 9) House Numbers for Outside,

DoinMaster Metal Solar Address Signs for Yard with Warm White & Cold White - 50 Customizable (from 0 to 9) House Numbers for Outside,

Solar powered. Built-in rechargeable battery and highly efficient LED lights included. Two selectable lighting modes – cool white and warm white. Durable and weather resistant metal construction provides a long-lasting experience. Numbers are visible at night. This is an ideal outdoor address marker for gardens, walkways, steps and cottages. 5 sets of numbers (from 0 to 9) and 4 clear spacers provided meet the maximum number selections. PATENTED rail mechanism makes it easy for number assembly and replacement. Assembly and Installation:
1) Assembly is required prior to using this product.
2) Unpack the box, and gently place all components on a flat and soft surface. Make sure you get 1 Display Body, 1 Ground Spike Set, 1 Number Lock, 2 Wide Spacers, 2 Narrow Spacers and 50 Numbers (5 sets 0 to 9).
3) The product was already assembled with 5 numbers before packing. To replace the numbers: first detach the number lock, then gently slide out the numbers in the rail through the opening at the right side.
4) To put in numbers: first detach the number lock, then slide the numbers into the rail through the opening at the right side. Fix the number lock in place.
5) You could put maximum 5 numbers in the rail. In case you need less than 5 numbers, you could put the clear spacer in the extra space without numbers.
6) Numbers should be handled gently to avoid breakage. Replace the number lock back to the opening after you put in all numbers required. Well keep the rest of the numbers for future use.
7) Choose a flat and sturdy location where it gets the maximum of direct sunlight for your Solar House Number Display. Assemble the ground spike set onto the Display Body so the item could be inserted into ground. Make sure the Display stands vertically and the solar panel is facing up. Now the assembly of your Solar House Number Display is completed.
8) Press the button on the bottom of the Display body to “ON” position to turn on your Solar House Number Display – press the button once for warm white light, and press it twice for cool white light. Press it again to turn off the light.

Trouble Shooting Tips:
If the product fails to work, it may be caused by the following:

1) The switch is in the “OFF” position. Press the switch to “ON” position.
2) Battery is not fully charged. Make sure the solar panel is placed in an area where the solar panel receives the maximum amount of full direct sunlight everyday. If the solar panel does not receive enough sunlight during daytime, e.g., due to cloudy or overcast weather conditions, it will be recharged on the next sunny day and resumes operation.
3) The solar panel is put too close to other light sources, e.g., street lights and porch lights, therefore the light sensing mechanism automatically turns off the circuit. Relocate the solar panel until it works properly.
4) The rechargeable battery may need to be replaced. Press the switch to “OFF” position. Unscrew the battery cover to replace the battery and screw the cover on. Use only rechargeable Lithium Battery model 14500, with volage of 3.2V and capacity not less than 600mAh, for replacement.

Warnings:
1) Contains Lithium battery. Battery must be recycled or disposed of properly. Do not dispose of old batteries in household waste. Do not dispose of batteries in fire or expose it to excessive heat. Recycle all used batteries at a proper battery recycling facility. Do not attempt to open batteries.
2) Never use non-rechargeable batteries on a solar product.
3) Make sure batteries are properly polarized during battery replacement.
4) Don’t attempt to disassemble the Solar House Number Display, otherwise it would damage the product.

Maintenance:
1) For best performance, always keep the Solar House Number Display clean. Clean the dust or other objects on the solar panel periodically to assure sufficient charging.
2) Always locate the solar panel away from strong light objects to assure proper working.

CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.