LOTOS Apex LTP6300D | 63A Non-Touch Pilot Arc Plasma Cutter, Drag-Cut Enabled, Non-HF Blowback Start, 3/4" Clean (1" Sever), Dual-Voltage 110/220V,

LOTOS Apex LTP6300D | 63A Non-Touch Pilot Arc Plasma Cutter, Drag-Cut Enabled, Non-HF Blowback Start, 3/4" Clean (1" Sever), Dual-Voltage 110/220V,

63A Cutting Power (Shop/Fab): Up to 3/4" clean and 1" sever on suitable materials with reduced slag and minimal post-grind. Non-HF Blowback + Pilot Arc (Auto/Body): Low-EMI, reliable starts through paint, rust, and expanded mesh for cleaner pierces and consistent kerfs. Drag-Cut Control (HVAC/Thin Sheet/Art): Glide the torch on the workpiece for straight templates and smooth freehand lines; use LOTOS DC6309 drag consumables (sold separately) for best edges. Dual-Voltage Flex (Garage/Jobsite): Auto 110/120V or 220/240V; typical 120V up to 3/8" clean (1/2" sever), 240V up to 3/4" clean (1" sever)—work with the power you have. LED Panel Tuning (Quality/Consistency): Set Pilot-Arc 6–15 s and Post-Flow 2–10 s; input-pressure reminder helps stabilize the arc and extend torch life. Power & Air (Shop Standard): Recommended breakers 50A @120V / 40A @240V; clean, dry air ≥70 PSI @ ~4.0 SCFM for reliable starts and cleaner edges. Materials (Real Jobs): Cuts stainless, alloy/mild steel, aluminum, and copper for patch panels, farm/ranch repairs, trailer frames, and metal art. Consumables (Compatibility): Works with LOTOS NCON series (NCON21: B07GC8ZC4D, NCON17: B08P7XY9R9, NCON12: B07GC9HTDJ, NCON02: B07GC8488X) and Drag-Cut DC6309: B0DY9Y9QWL.

LOTOS Apex Series LTP6300D — 63A dual-voltage plasma cutter built for real-world jobs from auto-body patch panels and farm/ranch repairs to HVAC ducting, metal art, and small-shop fabrication. The LTP6300D combines Non-HF blowback start with Non-Touch Pilot Arc for low-EMI, reliable ignition on coated or rusty metal, plus Drag-Cut capability for thin-sheet control.

• Performance: Up to 3/4" (19 mm) clean and 1" (25 mm) sever depending on material and technique.
• Non-HF Blowback + Pilot Arc: Stable, low-interference starts through paint, rust, and expanded mesh.
• Drag-Cut Enabled: Trace templates or freehand lines; for best edges, use LOTOS DC6309 drag consumables (sold separately).
• LED Controls: Pilot-Arc Time 6–15 s and Post-Flow 2–10 s; on-screen input-pressure reminder helps maintain consistent kerf and extend torch life.
• Dual-Voltage 110/220V: Automatic 110–125V / 215–245V input for shop or field use.

• Electrical: Recommended breakers 50A @120V / 40A @240V
• Output: 220/240V: 20–63A DC (up to 3/4" clean; 1" sever)  |  110/120V: 20–35A DC (up to 3/8" clean; 1/2" sever)
• Air: Clean, dry air ≥70 PSI @ ~4.0 SCFM

• NCON series: NCON21 (B07GC8ZC4D), NCON17 (B08P7XY9R9), NCON12 (B07GC9HTDJ), NCON02 (B07GC8488X)
• Drag-Cut: DC6309 (B0DY9Y9QWL)

Note: Cutting performance varies with material, thickness, torch height, consumables, air quality, and operator technique. For drag cutting, use dedicated drag-cut consumables and maintain dry, stable air.