AudioControl EPIC4000 Competition-Grade Monoblock Amplifier Car Audio 4000W RMS, Class D Subwoofer Amplifier with Low Pass & Subsonic Filter, Bass

AudioControl EPIC4000 Competition-Grade Monoblock Amplifier Car Audio 4000W RMS, Class D Subwoofer Amplifier with Low Pass & Subsonic Filter, Bass

𝗖𝗼𝗺𝗽𝗲𝘁𝗶𝘁𝗶𝗼𝗻-𝗚𝗿𝗮𝗱𝗲 𝗠𝗼𝗻𝗼 𝗔𝗺𝗽𝗹𝗶𝗳𝗶𝗲𝗿: This digital Class D amp is equipped with a compact chassis and line-level inputs for use with most vehicles with aftermarket head units (6.1” W x 21” L x 2.04” H). 𝗥𝗼𝗯𝘂𝘀𝘁 𝟰𝟬𝟬𝟬𝗪 𝗥𝗠𝗦 𝗣𝗼𝘄𝗲𝗿 𝗢𝘂𝘁𝗽𝘂𝘁: This 4Ω, 2Ω, or 1Ω stable bass amplifier delivers heart-pounding low end with precise clarity (104.8 dBa signal-to-noise ratio). 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝗱 𝗕𝗮𝘀𝘀 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 𝗞𝗻𝗼𝗯: Control the volume of your car subs from the driver’s seat. The ACR-E can be mounted with the included dash bracket or flush mounted directly on the dash, console panel, or other areas for custom installations. 𝗘𝗣𝗜𝗖 𝗕𝗮𝘀𝘀 𝗕𝗼𝗼𝘀𝘁: Variable 0-12dB bass equalizer enhances your music by amplifying specific frequencies between 30-80 Hz. 𝗦𝘂𝗯𝘀𝗼𝗻𝗶𝗰 𝗮𝗻𝗱 𝗟𝗼𝘄-𝗣𝗮𝘀𝘀 𝗙𝗶𝗹𝘁𝗲𝗿𝘀: 12dB/octave Linkwitz-Riley crossovers ensure only the correct frequencies reach your car speakers. 𝗠𝘂𝗹𝘁𝗶𝗽𝗹𝗲 𝗕𝘂𝗶𝗹𝘁-𝗜𝗻 𝗣𝗿𝗼𝘁𝗲𝗰𝘁𝗶𝗼𝗻 𝗠𝗼𝗱𝗲𝘀: Protect against low/high voltage, unexpected short-circuits, or other potential electrical or thermal hazards to keep this 4000w amp in excellent working condition. 𝗣𝘂𝗿𝗲, 𝗨𝗻𝗶𝗻𝘁𝗲𝗿𝗿𝘂𝗽𝘁𝗲𝗱 𝗣𝗼𝘄𝗲𝗿: Solid wire terminals with hex screws (0GA power, 8GA speaker terminals) provide solid connections for maximum, reliable current flow. Required fuse rating: 400A x 1 or 200A x 2 (sold separately). Fuse MUST be installed within 12" of its connection to battery. 𝗕𝘂𝗶𝗹𝘁 𝗳𝗼𝗿 𝗧𝗵𝗲 𝗘𝗣𝗜𝗖𝗘𝗡𝗧𝗘𝗥: Easily connect your car amplifier to AudioControl’s legendary bass restoration processor (sold separately) via The EPICENTER Link port, which provides +12V power, ground, and remote-turn on with built-in fuse protection. 𝗣𝗮𝗶𝗿 𝘄𝗶𝘁𝗵 𝗘𝗣𝗜𝗖 𝗦𝗽𝗲𝗮𝗸𝗲𝗿𝘀 𝗮𝗻𝗱 𝗦𝘂𝗯𝘄𝗼𝗼𝗳𝗲𝗿𝘀: Unleash groundbreaking volume and crystal-clear audio throughout your entire car sound system. *𝗜𝗠𝗣𝗢𝗥𝗧𝗔𝗡𝗧 𝗜𝗡𝗦𝗧𝗔𝗟𝗟 𝗥𝗘𝗤𝗨𝗜𝗥𝗘𝗠𝗘𝗡𝗧𝗦: (1) Two 0-gauge power wires and two 0-gauge ground wires are required for this amplifier to function. (2) Each 0-gauge power wire must have a 200-amp fuse installed within 12 inches of its connection to the battery. (3) Use only high-quality 0-gauge OFC (oxygen-free copper) wire for all power and ground connections. (4) Do NOT mount the amplifier to subwoofer enclosures. The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to insane levels. The EPIC4000 is the definitive engine for competition-grade audio. Engineered for extreme efficiency and uncompromising stability down to the lowest impedances, this amplifier is built with oversized components and advanced thermal management to deliver its rated wattage reliably – not just on the bench, but deep into every demanding track. It's not just about the loudness; it's about converting colossal power into pure low-frequency output that dominates the sound stage and achieves legendary SPL scores.