Heurofosh 27341 Skeg Protector Guard Safe for Mercury Mariner 40-50-60 HP 2 & 4 Stroke 1991-Present Stainless Steel Wear Tab 1903

Heurofosh 27341 Skeg Protector Guard Safe for Mercury Mariner 40-50-60 HP 2 & 4 Stroke 1991-Present Stainless Steel Wear Tab 1903

This Boat Skeg Repair Guard can cover and protect your skeg against damage from ramp dragging, reduce wear and tear from rocks, hidden debris, and submerged objects, also certainly can replace a broken skeg and keep boat balance Skeg Guard Protector fits for Mercury Mariner 40HP 50HP 60HP 2/4 Stroke Motor (Smaller 3.44" Gearcase, 2.07) 1991-Present. Replace OE Number: 27341 Strong Durable Material. Made of 18 Gauge Marine Grade 316 Stainless Steel with self-locking hardware and a mirror-polished finish. Comes with Male & Female Stainless Locking Screws, 1/4-inch drill and hex key tools Rational Considerate Engineering. Thickened 3mm lower wear tab reduces ramp dragging. Guard also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing Easy Installation. Remain 2-3 Inches of Skeg firstly. Use a rubber mallet, slide the Guard onto the existing skeg and gently tap on it until fully seated. Then use the pre-drilled holes of the guard to drill skeg with a 1/4-inch drill bit supplied with the product, tighten the hardware with the hex key tool

Marine Grade Stainless Steel Skeg Guard Protector incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.

27341 Skeg Guard Protector fits for Mercury Mariner 40-50-60 HP 2 4 Stroke Motor (Smaller 3.44" Gearcase, 2.07) 1991-Present. 

Function – Protects your skeg from corrosion and wear in the harsh marine environment. Thickened 3mm lower wear tab reduces ramp dragging and is ideal for river running. It will be stronger and much more affordable than welding and replacing a lower skeg.

Perfect Design – Design for your skeg, drain hole prevents against corrosion/freezing for longer wear. No discernable drag, won't compromise Performance, avoid expensive repair costs.

Superior Material – Made of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror polished to improve the gloss of the surface, prevent rust and corrosion, durable and long service life. Meeting or exceeding OEM specification.

Installation Step:

• STEP 1. Ensure proper fit before installing the Skeg Guard. There must be at least two to three inches of upper skeg remaining to secure the new Skeg Guard to. lf any portion of the skeg has been bent or distorted, fitment may be difficult without re-conforming to original shape.
• STEP 2. Any spurs or jagged edges should be filed smooth, so the Skeg Guard can easily slide over the existing skeg.
• STEP 3.  Place the guard on the skeg, use a leather, rubber or wooden mallet, gently tap on it to get it started until fully seated.
• STEP 4. Using the two pre-drilled mounting holes in the  Skeg Guard as pilot holes, drill the skeg using a 1/4" drill bit, and install the stainless steel hardware using the hex key tool supplied with the product. The hardware includes a thread locker sealant to prevent loosening of the bolts once installed.