Captain O-Ring - OR-34 / OR-34A (2 Pack) Replacement O-Rings for Culligan and Ace Filters (2 Sets, 4 O-Rings)

Captain O-Ring - OR-34 / OR-34A (2 Pack) Replacement O-Rings for Culligan and Ace Filters (2 Sets, 4 O-Rings)

Includes 4 O-Rings (2x Smaller "A" O-Ring and 2x Larger "B" O-Ring) Fits: Culligan HF-150(A), HF-160, HF-360(A), and others (see description below) OR-34A should be replaced every two filter changes, or when leaking. Compatible with silicone lubricant (and many other lubricants) to ease installation. Molded from NSF 61 certified buna-n rubber for safe and clean drinking water. Manufactured and warrantied by Captain O-Ring LLC. Proudly assembled in the USA! Before replacing the o-ring, refer to the bottom of the sticker on of your Culligan filter housing. Two different o-ring sizes are enclosed:

Sticker plates coded "Rev C" or higher, for models HF-150A, HF-360A, and Ace 45025 housings should use the smaller o-ring enclosed.

Sticker plates coded "Rev A" or "Rev B" for models HF-150A and ALL other models (HF-160, HF-360, HF-365, Ace 45025, Ace 46764, Ace 49560) should use the larger o-ring enclosed.

Note: The o-ring labels seen in the picture are just for representation. The o-rings can be identified by their size difference in the package using the instructions above to determine the correct size for your filter.

The o-ring installation process is incredibly easy. To install the o-ring, remove the old o-ring and clean out the groove with a clean cloth. Lubricate the new o-ring with clean/new silicone grease. Press the o-ring into groove with two fingers, ensuring that it sits flat and level in the groove.

What to expect:
This item includes two (2) larger o-rings and two (2) smaller o-rings [4 o-rings total] in a resealable zip-top poly bag with "Captain O-Ring" branded packaging.

Manufactured and warrantied against defect for one year by Captain O-Ring LLC. "Captain O-Ring" is a registered trademark of Captain O-Ring LLC.