PAM8610 Dual Channel DC 12V Pure Digital Audio Stereo Amplifier PCB Board Class D 10W x 2 High Power Amplifier Module

PAM8610 Dual Channel DC 12V Pure Digital Audio Stereo Amplifier PCB Board Class D 10W x 2 High Power Amplifier Module

Can operate on any voltage from 7.5V to 15V, conveniently powered with a 9V or 12V power supply or battery Provides 10W (left channel) + 10W (right channel) output power into an 8Ω speaker load and 12V power supply CMOS class D amplifier design for efficiency > 90% Screw terminals for easy speaker connection - no soldering needed Includes power switch and mute switch connectors (wire external SPST switches to these connectors to provide remote power on/off and mute) and an onboard volume control potentiometer

This PAM8610 module is a 10W, class-D stereo audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction, all in a compact form factor. It can operate from a 9V or 12V power supply or batteries, and includes power switch and mute switch connectors, a volume control potentiometer and speaker connector screw terminals for ease of use.

It can be used in any DIY design requiring a miniature audio amplifier, especially portable and mobile applications operating on battery power.

Specifications:

• Audio input connector: 3.5mm stereo headphone jack
• Remote power and mute switch connectors: JST-style pins with 2.54mm (0.1") pin pitch
• Output power: 10W + 10 W (8Ω)
• Frequency response: 20Hz to 50KHz
• Amplifier class: D
• Operating voltage: 7.5 - 15V DC
• Recommended supply voltage: 12V, the connector center PIN is +
• Quiescent Current: 20mA
• Efficiency: 90%
• Speaker Load: 4-8 Ohms, 8 Ohms recommended, screw terminal connectors
• Size: 40 x 40 x 22 mm (L x W x H); 55 x 40x 22 including volume control knob
• Net weight: 24g

Note: Left and right channel "negative" connections should not be connected together, otherwise it may damage the module. Speakers (load) should be connected before power is applied to the module.