Automatic Rebar Tie Gun, 7-33mm Handheld Rebar Tier Tying Machine, 0.3-1.33" Electric Steel Bar Tie Tool with 2 Batteries, Rebar Tying Binding Tool

Automatic Rebar Tie Gun, 7-33mm Handheld Rebar Tier Tying Machine, 0.3-1.33" Electric Steel Bar Tie Tool with 2 Batteries, Rebar Tying Binding Tool

🏗️【Automatic Rebar Tier】Easily to handle, Completely automatic finish all the steps of steel bar rod banding work, can save 3-5 times than man power by hand. High capacity lithium battery, Working hour last 3 hours at least. 🏗️【Main Parameters】Wire diameter-0.8mm, Wire length: 120M/per roll, Rope range-8mm~34mm, Battery capacity-13200mah, Voltage-12V, Working Hour: 3 hours/per battery, Charging Time: 2 hours. Product weight: 6.61 lb. 🏗️【High Performance】Sharp cutting edge more stable and durable, strapping tightness can be adjusted, suit for variety of working conditions. Easy to replace wire by a switch. 🏗️【Features】Compact size, lightweight, easy to grab. Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance. Rebar Tier is a hand held machine used to pack rebars quickly. It is a miniature motor tool has the trait of safety and credibility. 🏗️【Wide Applications】Suitable for rebar tying machine in building market: including civil building, steel bar tying, floor pipe, heating floor mesh, steel bar, etc.

Specification:

• Color: Blue/Orange
• Material: Plastic + Metal
• Voltage: 12V
• Battery: Lithium Ion Batteries
• Battery Capacity: 1500 mAh
• Battery Charging Time: 1.5 hours full filling
• Tying Wire Diameter: 0.8mm
• Tying Wire Length: more than 110 m
• Applicable Scope Of Steel Strapping: 8mm - 34mm
• Knot Wire Length: 300 - 500mm
• Knot Number Per Charge: 1500 times
• Knot The Required Time: 0.8 seconds at a time
• Machine Size: 275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(appr.)

How to Install the Tying Wire?

• 1. In the state of start-up, press the locking plate of the opening wire plate, open the plate cover.
• 2. Take out the tying wire, tear the packaging film, pull straight wire head about 10 cm, load into the binding machine in the clockwise direction, the wire head into the guide tap tube.
• Note: Clench the wire plate when tear the packaging film, do not let the wire loose. If the wire is free to disperse, it will lead to the spread of the wire stuck in the wire plate.
• 3. Insert the head of the wire guide into the tap pipe until it is resisted.
• 4. Cover the plate and fasten the locking piece.
• 5. Pinch the wire forward with two fingers, press and hold the switch and send the wire out.
• 6. If you want to take out the wire plate when finished, press and hold the locking piece, open the wire plate cover plate, holding the wire tray to the side and pull out.

Package Included:

• 1 x Tying Machine
• 1 x Plier
• 1 x Charger
• 1 x Storage Box
• 2 x Lithium Ion Batteries
• 1 x Tying Wire in the Machine (Tying Wire Standard: About 0.8 mm x 110 m/roll)